DT Swiss FR541 / Hope Pro 5 Handbuilt Enduro/DH/E-Bike Wheelset
Build time is about a week.
Mullet setup is available
New Downhill rims that are lighter than the outgoing FR560, great for E-Bikes too.
For E-Bikes the steel E-Bike specific rear hub with steel freehubs are recommended (only available in 6 bolt). The steel freehubs will fit the Centerlock hubs but they are not offered by Hope as standard, please enquire if you want this combination.
Available in 27.5" and 29" or Mullet (29" front 27.5" rear) 32 spokes
Rim weights: 570g (27.5") 605g (29")
New Pro 5 hubs available in Centerlock and straight pull disc fittings.
The Pro 5 hub has a new freehub design that has very low drag, fast engagement and better sealing for trouble free use.
SuperBoost hub has 6-bolt fitting only.
Fully convertible for most axle applications.
Available in a choice of 6 colours
Sapim Race black spokes.
Sapim brass nipples. Black
The following freehubs are available:
Shimano 10-11 speed aluminium, 108 points of engagement - Fits Shimano, Sunrace plus all SRAM cassettes that have an 11 tooth smallest sprocket
Shimano 10-11 speed steel, 54 points of engagement for added durability - Same fitments as above but stronger (& heavier) freehub body that is more resistant to damage from the individual cassette sprockets
Shimano Microspline, 108 points of engagement - Only fits Shimano 12 speed MTB cassettes. Will not fit any SRAM cassettes
SRAM XD, 108 points of engagement - Only fits SRAM MTB cassettes that have a 10 tooth smallest sprocket. SRAM MTB cassettes with an 11 tooth smallest sprocket, including Eagle 12 speed, require a Shimano 10-11 speed freehub
Steel versions of the Microspline and XD freehubs are available on the E-Bike specific rear hub (same hub, 6-bolt disc only but with a slightly different logo)
|Brake Type:||Disc Brake|
|Front/Rear:||Front & Rear|